SNUG - The Futon that thinks it's a sofa.
Simply pull on the front and in seconds the SNUG is a full size double bed. Lift and push back and it's a sofa again. Our Advaans Futon System means that the mattress folds out and back again by itself and then tucks neatly down at the rear. Together with the fully upholstered arms this gives an authentic sofa look.
As you don't need to get to the side or rear for conversion - your sofa can be a snug as a bug ... in the tightest of spaces. The easy-to-assemble modular design allows the SNUG to be placed in the most difficult to get to rooms, as each part will fit easily through any doorway. Available in a wonderful range of colours to suit any location the SNUG is upholstered in our Prime fabric, attractive and luxurious, but tough and easy-clean.
So that's it, a futon that looks like a sofa that folds out to a bed? Not quite - flip the front plinth up and you'll find 3.5 cubic feet of storage space in there, plenty for all your bedding or anything else, or add a wheeled store-drawer for even more convenience. As with all the things we design and make, the SNUG tries to minimise it's impact on the environment. All timber is European sourced from certified sustainable forests, the SNUG does not use any imported frame or mechanism and it is 100 percent made here at Sit and Sleep in Cambridge.
Supreme Futon Mattress (as standard) Ideal for frequent bed or sofa use.
Optional Futon Mattress Upgrade:
FoamLux Futon - The addition of a foam core to the mattress gives a more luxurious and resilient filling.
Dimensions in cm
The sleeping area of the Snug mattress is 137 x 190cm.
The maximum packing height clearance for the Snug StoreDrawer is 20cm.The Storage area under the front plinth of the Snug sofa bed (without drawer) is 100 x 50 x 20cm (w x d x h).
The SNUG sofa bed is despatched as four packages.
Three cardboard boxes containing the base:
107 x 73 x 31cm - 16Kg (Arms)
163 x 91 x 26cm - 19Kg (Plinth/Seat/Beam)
148 x 67 x 22cm - 15Kg (Back/Down)
The cushion set is rolled and bagged in heavy duty plastic.
Typical measurements and weights are:137 x 55cm (rolled) - 20Kg
Optional Store-drawer is pre-assembled and packed as a cardboard box:109 x 53 x 20cm 8Kg
Final assembly of the component sections of the SNUG is needed before use. This can be summarised into three separate stages:
1. Attach the arms rests to the beam under-frame.
2. Bolt the seat section and back/down section of the operating frame together.
3. Attach the operating frame to the beam under-frame.
All necessary fixings are provided in the assembly pack.
You may find it easier to complete the assembly with the help of one other person.
Finally just place the duo-futon mattress onto the assembled frame.